SORU: Uçak teknisyenleri ne iş yapar?
CEVAP: Uçaklar bakım merkezlerinde değişik safhalarda yapılması zorunlu bakımlara girerler. Uçak Teknisyenleri de yetkileri dahilinde bu bakım işlemlerine bizzat katılarak ilgili bakım kartlarında bulunan komponentlerin bakımını ve arıza giderme işlemlerini yaparlar.
SORU: Uçak teknisyenliği için yaş sınırı var mıdır?
CEVAP: 18 yaşını doldurmuş olmak gereklidir.
SORU: Uçak teknisyeni olmak için hangi okullara gidilir?
CEVAP: Uçak Bakımı Bölümü bulunan Meslek Liseleri, Sivil Havacılık Meslek Yüksekokulları ve Sivil Havacılık Yüksekokulları’na gidilir.
SORU: Uçak teknisyenliği eğitiminde ne tür dersler işlenir?
CEVAP: Temel uçak teorik ve pratik derslerinin yanında İnsan Faktörleri ve Havacılık Kuralları, yabancı dil gibi dersler işlenir.
Sivil Havacılık Yüksekokulları’nda ise temel mühendislik dersleri ve yukarıdabelirtilen dersler ileri seviyede işlenir.
Showing posts with label Part 66. Show all posts
Showing posts with label Part 66. Show all posts
19 August 2016
3 August 2016
24 March 2014
EASA Part 66 PRACTICAL TRAINING MATRIX
| PRACTICAL TRAINING MATRIX | |
| ATA REF | TYPE TRAINING SUBJECTS |
| INTRODUCTION | |
| 6 | Dımensıons And Areas |
| 5 | Tıme Lımıts - Maıntenance Checks |
| 7 | Lıftıng And Shorıng |
| ATA REF | SUBJECTS/TASKS PERFORMED | T.C. | C. |
| INTRODUCTION | |||
| 5 | TIME LIMITS - MAINTENANCE CHECKS | ||
| 5 | 100 hour check (general aviation aircraft). | DOC | M |
| 5 | “B” or “C” check (transport category aircraft). | SGH | M |
| 5 | Assist carrying out a scheduled maintenance check i.a.w. AMM. | DOC | M |
| 5 | Review Aircraft maintenance Log for correct completion. | DOC | M |
| 5 | Review records for compliance with airworthiness directives. | DOC | M |
| 5 | Review records for compliance with component life limits. | DOC | M |
| 5 | Procedure for inspection following heavy landing. | DOC | M |
| 5 | Procedure for inspection
following lightning strike. |
Basic Maintenance Experience Logbook For EASA Part 66 license
General:
This document has been developed by Civil Aviation Authority to assist applicant to comply with Commission
regulation (EC) No 2042/2003 by record his/her basic practical maintenance experience.
This document has been developed by Civil Aviation Authority to assist applicant to comply with Commission
regulation (EC) No 2042/2003 by record his/her basic practical maintenance experience.
EASA Part 66 Category B1.1 Licence Question Numbers with levels
| SUBJECT | QTY | LEVEL |
| M01.1 Arithmetic | 6 | Level 2 |
| M01.2 (a) Evaluatin simple algebraic expressions, addition, subtraction, … | 3 | Level 2 |
| M01.2 (b) Linear equations and their solutions | 11 | Level 1 |
| M01.3 (a) Simple geometric constructions | 3 | Level 1 |
| M01.3 (b) Graphical representation | 4 | Level 2 |
| M01.3 © Simple trigonometry | 3 | Level 2 |
EASA Part 66 Category A1 Licence Training Content
| Module | PART 66 Subject | Level |
| 1 | Mathmatics | |
| 1.1 | Arithmetic | 1 |
| 1.2 | Algebra | |
| 1.2 (a) | Evaluatin simple algebraic expressions, addition, subtraction, … | 1 |
| 1.2 (b) | Linear equations and their solutions | |
| 1.3 | Geometry | |
| 1.3 (a) | Simple geometric constructions | |
| 1.3 (b) | Graphical representation | 2 |
| 1.3 (c) | Simple trigonometry |
19 March 2014
18 March 2014
What does ‘Certifying Staff’ mean?
Personnel responsible for
the release of an aircraft or a component after maintenance.
15 June 2013
MODULE 4. ELECTRONIC FUNDAMENTALS
4.1 Semiconductors
4.1.1 Diodes
4.1.1(a)
Diode symbols;
Diode characteristics and properties;
Diodes in series and parallel;
MODULE 5. DIGITAL TECHNIQUES / ELECTRONIC INSTRUMENT SYSTEMS
5.1 Electronic Instrument Systems
Typical systems arrangements and cockpit layout of electronic instrument systems
5.2 Numbering Systems
Numbering systems: binary, octal and hexadecimal;
MODULE 6. MATERIALS AND HARDWARE
6.1 Aircraft Materials — Ferrous
6.1(a)
Characteristics, properties and identification of common alloy steels used in aircraft;
MODULE 7A. MAINTENANCE PRACTICES (except for B3 licence)
7.1 Safety Precautions-Aircraft and Workshop
Aspects of safe working practices including precautions to take when working with electricity, gases especially oxygen, oils and chemicals.
Subscribe to:
Posts (Atom)