24 March 2014

EASA Part 66 Category B2 Aircraft Type Training Syllabus


ATA ref. Licence
cat B2
Level
Time limits/ maintenance checks 5 1
dimensions/Areas (MTOM, etc) 6 1
Lifting and Shoring  7 1
levelling and weighing 8 1
Towing and taxiing 9 1
Parking/mooring, Storing and return to service 10 1
Placards and markings 11 1
Servicing 12 1
Standard practices- only type particular 20 1
helicopters
rotors 62 1
Rotors-monitoring and indicating 62A 3
Rotor drives 63 1
Rotor drives-monitoring and indicating 63A 3
Tail rotor 64 1
Tail Rotor-monitoring and indicating 64A 3
Tail rotor drive 65 1
Tail Rotor drive-monitoring and indicating 65A 3
Emergency flotation equipment 25 1
Aeroplanes structures
Standard practices and structures (damage classification, assessment and repair) 51 1
Fuselage 53 1
Nacelles/Pylons 54 1
Stabilisers 55 1
Windows 56 1
Wings 57 1
Flight control surfaces (all) 27A 1
Doors 52 1
Zonal & station identification systems 1
Airframe systems
Air conditioning 21 3
Air supply 21A 2
Pressurisation 21B 3
Safety & warning devices 21C 3
 autoflight 22 3
communications 23 3
Electrical power 24 3
Equipment & furnishings 25 1
Electronic equipment including emergency equipment 25A 3
Fire protection 26 3
Flight controls 27 2
Sys. Operation : Electrical/Fly-by-Wire 27A 3
Fuel systems 28 2
Fuel systems-monitoring and indicating 28A 3
Hydraulic power 29 2
Hydraulic power-monitoring and indicating 29A 3
Ice & rain protection 30 3
Indicating/ recording systems 31 3
Instrument systems 31A 3
Landing gear 32 2
Landing gear-monitoring and indicating 32A 3
Lights 33 3
Navigation 34 3
Oxygen 35 2
Pneumatic 36 2
Pneumatic-monitoring and indicating 36A 3
vacuum 37 2
Water/waste 38 2
Water ballast 41 1
Integrated modular avionics 42 3
Cabin systems 44 3
On-board maintenance systems (or covered in 31) 45 3
Information systems 46 3
Cargo and Accessory compartments 50 1
Turbine engines
Standard practices-engines 70 1
Constructional arrangement and operation (installation inlet, compressors, combustion section, turbine section, bearings and seals, lubrication systems) 70A 1
Engine performance 70B 1
powerplant 71 1
Engine turbine/ turboprop/ ducted fan/ unducted fan 72 1
Engine fuel and control 73 1
air 75 1
Engine controls 76 1
exhaust 78 1
oil 79 1
starting 80 1
Water injection 82 1
Accessory gearbox 83 1
Propulsion augmentation 84 1
FADEC 73A 3
Ignition 74 3
Engine indicating systems 77 3
Auxiliary Power Units (APUs) 49 2
Piston engines
Standard practices-engines 70 1
Constructional arrangement and operation (installation, carburettors, fuel injection systems, induction, exhaust and cooling systems, supercharging/turbocharging, lubrication systems) 70A 1
Engine performance 70B 1
powerplant 71 1
Engine control 76 1
oil 79 1
starting 80 1
turbines 81 1
Water injections 82 1
Accessory gear boxes 83 1
Propulsion augmentation 84 1
FADEC 73A 3
Ignition 74 3
Engine indication systems 77 3
propellers
Standard practices Propellers - General 60A 1
Propellers/ propulsion 61 1
Propeller synchronising 61C 1
Propeller electronic control 61D 3
Propeller maintenance 61F 1