LINK:
http://www.caa.co.uk/docs/33/CAP741.PDF
Showing posts with label Syllabus. Show all posts
Showing posts with label Syllabus. Show all posts
26 November 2014
24 March 2014
| ATA REF | SUBJECTS/TASKS PERFORMED | T.C. | C. |
| INTRODUCTION | |||
| 5 | TIME LIMITS - MAINTENANCE CHECKS | ||
| 5 | 100 hour check (general aviation aircraft). | DOC | M |
| 5 | “B” or “C” check (transport category aircraft). | SGH | M |
| 5 | Assist carrying out a scheduled maintenance check i.a.w. AMM. | DOC | M |
| 5 | Review Aircraft maintenance Log for correct completion. | DOC | M |
| 5 | Review records for compliance with airworthiness directives. | DOC | M |
| 5 | Review records for compliance with component life limits. | DOC | M |
| 5 | Procedure for inspection following heavy landing. | DOC | M |
| 5 | Procedure for inspection
following lightning strike. |
EASA Part 66 Category B1.1 Licence Question Numbers with levels
| SUBJECT | QTY | LEVEL |
| M01.1 Arithmetic | 6 | Level 2 |
| M01.2 (a) Evaluatin simple algebraic expressions, addition, subtraction, … | 3 | Level 2 |
| M01.2 (b) Linear equations and their solutions | 11 | Level 1 |
| M01.3 (a) Simple geometric constructions | 3 | Level 1 |
| M01.3 (b) Graphical representation | 4 | Level 2 |
| M01.3 © Simple trigonometry | 3 | Level 2 |
EASA Part 66 Category A1 Licence Training Content
| Module | PART 66 Subject | Level |
| 1 | Mathmatics | |
| 1.1 | Arithmetic | 1 |
| 1.2 | Algebra | |
| 1.2 (a) | Evaluatin simple algebraic expressions, addition, subtraction, … | 1 |
| 1.2 (b) | Linear equations and their solutions | |
| 1.3 | Geometry | |
| 1.3 (a) | Simple geometric constructions | |
| 1.3 (b) | Graphical representation | 2 |
| 1.3 (c) | Simple trigonometry |
15 June 2013
MODULE 4. ELECTRONIC FUNDAMENTALS
4.1 Semiconductors
4.1.1 Diodes
4.1.1(a)
Diode symbols;
Diode characteristics and properties;
Diodes in series and parallel;
MODULE 5. DIGITAL TECHNIQUES / ELECTRONIC INSTRUMENT SYSTEMS
5.1 Electronic Instrument Systems
Typical systems arrangements and cockpit layout of electronic instrument systems
5.2 Numbering Systems
Numbering systems: binary, octal and hexadecimal;
MODULE 6. MATERIALS AND HARDWARE
6.1 Aircraft Materials — Ferrous
6.1(a)
Characteristics, properties and identification of common alloy steels used in aircraft;
MODULE 7A. MAINTENANCE PRACTICES (except for B3 licence)
7.1 Safety Precautions-Aircraft and Workshop
Aspects of safe working practices including precautions to take when working with electricity, gases especially oxygen, oils and chemicals.
MODUL 8-AERODYNAMICS
8.1 Physics of the Atmosphere
International Standard Atmosphere (ISA), application to aerodynamics.
8.2 Aerodynamics
Airflow around a body;
MODULE 9A. HUMAN FACTORS (except for B3 licence)
9.1 General
The need to take human factors into account;
Incidents attributable to human factors/human error;
‘Murphy's’ law.
MODULE 10. AVIATION LEGISLATION
10.1 Regulatory Framework
Role of International Civil Aviation Organisation;
Role of the Member States and National Aviation Authorities;
MODULE 11A. TURBINE AEROPLANE AERODYNAMICS, STRUCTURES AND SYSTEMS
11.1 Theory of Flight
11.1.1. Aeroplane Aerodynamics and Flight Controls
Operation and effect of:
— roll control: ailerons and spoilers;
— pitch control: elevators, stabilators, variable incidence
stabilisers and canards;
— yaw control, rudder limiters;
MODULE 15. GAS TURBINE ENGINE (B1.1)
15.1 Fundamentals
– Potential energy, kinetic energy, Newton's laws of motion, Brayton cycle;
– The relationship between force, work, power, energy, velocity, acceleration;
– Constructional arrangement and operation of turbojet, turbofan, turboshaft, turboprop.
MODULE 17A. PROPELLER (B1.1)
17.1 Fundamentals
Blade element theory;
High/low blade angle, reverse angle, angle of attack, rotational speed;
Propeller slip;
Aerodynamic, centrifugal, and thrust forces;
6 February 2013
Subscribe to:
Posts (Atom)